FUJIFILM X-T2 (Ver.4.0.0) -- Available in May 2018

• Addition of Focus Bracketing allowing the photographer to shoot focus distance bracketing of up to 999 frames.
• Compatible with new cinema lenses FUJINON MKX18-55mm T2.9 and FUJINON MKX50-135mm T2.9.
• Enlarged and customizable indicators and information in the viewfinder and/or LCD monitor. Users can also customize the location of where information is shown on the display.
• Addition of F-log SD card recording.
• Addition of 1080/120P high-speed video mode ideal for recording slow motion footage.
• Enhanced Phase Detection AF to improve performance in various shooting environments.
• Addition of "Flicker Reduction" to reduce flicker in both pictures and display when shooting under fluorescent lighting.
• Addition of "Select Folder" and "Create Folder" allowing users to choose the folder that images are stored in and to create a new folder.

v4.0.0 firmware is public

http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt2/index.html

And now it is not public anymore

To all loyal Fujifilm X Series customers and photographers,

It has been brought to our attention that there are a few issues with the recently released X-T2 ver 4.00 firmware update. We have therefore taken the difficult decision to remove the update from the website until we are confident that all the issues have been completely fixed.

We deeply apologize for any inconvenience and disappointment this has caused.

Sincerely yours,
Toshi Iida
General Manager
Optical Device and Electronic Imaging Products Division
Fujifilm Corporation, Tokyo, JAPAN

Details of the Problem

We have discovered malfunctions in the firmware ver.4.00 released on May 8 2018. They are as follows:

1. When RAW files, which were taken by X-T2 (before firmware ver.4.00), are converted in camera (ver.4.00) or by "FUJIFILM X RAW STUDIO", they are not converted properly.
2. When pressing the shutter button halfway under certain conditions, the live view can flicker.
3. In rare cases, a hang-up can occur.

We have identified the cause and plan to release the upgraded firmware to address the malfunctions as soon as we can.

In the meantime, for customers who have upgraded the firmware to ver.4.00, the firmware ver.4.01*, whose functions are same as ver.3.00, have been posted on our website. Please download it and update your camera.

• *Ver.4.01 doesn't include the additional functions of ver.4.00.

Again, we sincerely apologize for the inconvenience caused.

[ X-T2 Ver.4.01 Download page ]

• X-T2 Camera Body Firmware Update Ver.4.01

Note

We announced the firmware update for GFX 50S, X-H1 and X-Pro2, which was planned in May 2018, on the Global website on 12 Apr 2018. However, it will be postponed because we need more time to check the firmware for the three models. For detail, we will inform you later.

Firmware v4.10 released

• The functions of "Select Folder" and "Create Folder", which was planned to be included in Ver.4.10 will be incorporated in Ver.4.20 to be released in July 2018.
• Upgrading firmware from Ver.4.00 to Ver.4.10 will remove the functions of "Select Folder" and "Create Folder".

http://www.fujifilm.com/support/digital_cameras/software/firmware/x/xt2/index.html

Fujifilm X-T2 Mirrorless Body, Black - With Free Accessory Bundle, $1099

https://www.adorama.com/ifjxt2a.html

Fujifilm X-T2 Mirrorless with 18-55mm OIS Lens and Free Accessories, $1499

https://www.adorama.com/ifjxt2ka.html

FUJIFILM X-T2 Mirrorless Digital Camera Body with Free Accessory Kit, $799

https://www.bhphotovideo.com/c/product/1378583-REG/fujifilm_x_t2_mirrorless_digital_camera.html