@kurth Good question. I am awaiting the screen, and I will try it out on a number of cameras, including this one! Should be here at the end of next week. In principle, if this cam has a 1080 standard stream via HDMI it should work.

Guys, does anybody have iZugar E1 or iZugar's firmware? Are Z-CAM and iZugar E1 different?

Sorry Long Time AVK

when planning and testing the conversion of the e1 to active cooling, i came across a few interesting details

1.) sensor cooling of up to 50C to between 10 and 15C is most effective

2.) The cooling is almost invisible with video ( 3D noise reductin ) , with photo especially with ISO values ​​of more than 400 massively less noise

3.) After an update from Izuga E1 to the current Fw, the 1x1 resolution of 2500x2500 disappears this can be fixed / undone with a small hardware hack

My conversion of the E1 to active cooling has meanwhile become:

1.) E1 has become E2 housing hack with active cooling without a ventilator in which the chips and memory are also better cooled

2.) the Accu has grown to 1sLipo 1000mAh

3.) The New E1 box that looks like an RED e2 style eloxal Aluminium Housing 100x100x100mm

I first recreated the housing parts with 3D printing until they fit.

now a friend is milling the 20mm thick aluminum on a CNC machine As a finish, the aluminum fire red is anodized ...... the MN34230 sensor and Ambarella A9S75 are each cooled via a small peltier element with 15x15mm to the housing

I cool down to + 10C to avoid condensation.

@bob_hawk no improvement n video?

Noise that does not arise does not need to be removed.

The new panasonic / blackmagic red everywhere great importance is attached to good sensor cooling.

and the sensors were not operated up to the limmit.

Only Zcam claims that the noise is not a problem for you .....

Zcam has its external noise removal software to iron out noisy images again

Look the open BMPCC Pic

The huge success of BMPCC was partly due to the image quality .... the BMMCC had already cooled the sensor with a peltier element

I am selling mine iZugar Z4XL Remote Kabel Set on EBAY

Shipping woldwide with Tracking 10€

if you are interested , To special people i also make special prices

please contact here in the forum via private mail ... so that I can distinguish you from ebay customers

https://www.ebay.de/itm/133600176874

My setup for live music events and weddings:

3 x Zcam E1 started simultaneously as multicam recordings via remote.

In 3x 4k 30 Fps 3x the 100mbit hack --- 3x 128 Gb sandisk extreme pro

if there is little light, use lenses with at least F1.8 or F2 and switch off the automatics

The noise reduction set to low and a flat profile (less contrast, less color)

So I have achieved the best results with my 3 Zcam E3 even in low light

Good lenses !!! and time for color grading with Davinci Resolve are the most important things

meanwhile I use 2 x LM12XC KOWA manual lenses for the left and right stage cam

Set it once and let it run .. the hyperfocal distance at 12mm F2 makes it possibleI....I love this Lenses

NO.. live Stream on wlan lower than 400x600 ...Read on the last 15 Tabs you found all Information to E1

Max 1080p on hdmi only 60 fps....ok 30p Filming double same Frame

Nop no raw

On my BMMCC dng RAW on 1080 p60 Need sdcard 100mbit write Speed SanDisk Extreme PRO

Nope

I have 3 x Running ZCAM E1 international Version plus 2 x 4-channel RC remote

and 1 Z Cam E1 as a spare Parts Store

Location Europe and true am considering selling them