What's so good about all these new Cluster X settings? In simple terms, after looking at the rate control, quantisation and scaling matrices found in the GH3, Nikon D800 and Canon 5DMKIII I decided upon a radical approach to find out if the GH2 was capable of getting near their very low QP values (which range from predominantly 1 to 30 depending on the detail and luminance of the subject).

What I found was (and this had me concerned before) was that Panasonic's implementation / or ptools labelling!) of rate control using the GH2's quantisation parameter isn't too clear. I needed a way of having a minumum Quant and a desired maximum quant. Strangely with Initial Quantizer = 30, Quantizer for 1080 modes = 3 (+-2 can offer a QP of 1 !) and Quantizer for 720 modes = 30 I could sortof achieve this!!!!

With 720 using B frames (switched on in the 720 encoder 1 settings as = 3) Quantizer for 720 modes seems to work as a highest Quantisation setting (high is worse, low quant is best) together with Initial Quant of 30 (don't worry about such a high starting value here - after the first frame it settles straight back to lowest achievable (best) for the scene. Subsequently, Quantizer for 1080 modes = 3 gives me my lowest desired (best quant) for each opt 24p, 1080i, HBR and 720 modes.

This quantizer rate control now seems to work as in newer High Profile Level 5 (5.1) cameras such as the 5DMKIII and Nikon D800 (and seemingly the GH3) and when matched with a new softer looking matrix - as analysed on the Canon 5DMKIII (with adjustments) - brings a degree of softening to the over sharpe Pany lenses.

I'm also sure that 1080i/FSH?HBR modes work better with half the coded picture buffer size of 720p modes (indeed I switched off 720 Bottom setting (the buffer amount as in automatically works it out) whilst offering a fairly low buffer in bitrate settings in 'patches for testers'.

In summary, the range of QP will be (certianly in 1080p24 modes) from 1 to 30 - often staying very low (less than 10) all round. I believe (although only tested by myself) that the result offers extremely good looking 720p modes (probably the best ever), certainly superior 24p with Intra & Long GOP, and great looking HBR/FSH and iA mode control (though further strenuous tests may well be required). High dynamic functions work it seems too.

All the new Cluster X series settings for each GOP attached below have been tested on the notoriously sharp Pany OIS lenses. Give me feedback.

Its as simple as A, B, C, D, E, F ! Each .ini setting in ptools for Cluster X Series will equate to setA ('DREWnet' 12/15 GOP), setB ('Nebula' 6 GOP), setC ('Spizz' 3 GOP), setD ('Moon' 1 GOP/3 GOP). Any updates will stay on these sets.

"Cluster X Series isn't for pussies!" Driftwood 2013

If you enjoy these settings please don't forget to donate to personal-view by clicking on the link above. Gratitude and thanks to Vitaliy Kiselev.

I have a question (as a novice who's an idiot)

I hear a lot about frame rates and settings... But I just want to know what settings I should have this hack at in 24h smooth cinema mode?

On my GH2 the only settings I seem to be able to change when filming is through the scroll wheel.

Next to where it says cinA there's a yellow number that says 2.5? I'm not sure what this represents other than darkness or brightness or frame rate. But what setting should this be with this hack for optimum results?

When I push the scroll button in it also makes a 0 to +3 which makes the screen go darker or brighter... So I'm unsure where to set things?

Sorry for the dumb questions but I'm hopeless with this stuff and would appreciate any help. I'm so busy with a kid I just want a simple answer for filming without the hassles.

I know there is a lot of topic on this but I still can't make a clear decision. I'm going to film Podcast and concert, which of the 2 would handle these type of setting best?

Key New Features:

• Logic Pro X includes Drummer, a virtual session player that automatically plays along with your song in a wide variety of drumming styles and techniques
• Flex Pitch provides integrated pitch editing for audio recordings. This is way beyond AutoTune – Flex Pitch analyzes your audio and then lets do Melodyne-style audio editing. You can move the pitch of individual notes up or down, for pitch correction, or use it as a creative tool.
• Logic Remote lets you play and control Logic Pro X from an iPad, letting you create and mix music from anywhere in the room. (Screen shots below).
• Retro Synth is a new virtual instrument that emulates some of the most popular classic synthesizers from the 70s and 80s.
• Vintage Keyboards offer realistic models of electric pianos, B3 organs and clavs.
• Track Stacks lets you organize and collapse multiple tracks into one. It can also be used to create complex layered instruments.
• Smart Controls allow you to manipulate multiple plug-ins and parameters with a single move for quick and powerful sound design.
• An improved Mixer helps manage mix sessions more efficiently, with increased visibility into signal flow and dynamics and faster ways to manipulate channel inserts.

New tools for songwriting and music production:

• Drummer delivers professionally produced, realistic drum tracks that can perform millions of unique grooves in rock, alternative, songwriter and R&B genres. Drummer is powered by the performances and sounds of some of the industry’s top session players and recording engineers, including mixer/producer Bob Clearmountain.
• The new Drum Kit Designer plug-in lets you build your own custom kit using a diverse collection of professionally recorded snare drums, toms, hi-hats and cymbals that you can mix, match and fine tune to get the right drum sound for your song.

Logic Remote is a new way to extend the creative power of Logic by using your iPad. Designed to take full advantage of the iPad Multi-Touch display, Logic Remote gives users new ways to record, mix and even perform instruments in Logic Pro X from anywhere in the room.

Synthesizers and keyboards with more new instruments:

• The Arpeggiator is one of nine new MIDI plug-ins. It can transform a simple keyboard chord into an elaborate sequence.
• The new Retro Synth emulates some of the most popular classic synthesizer tones from the 70s and 80s.
• Vintage Keyboards offer realistic models of electric pianos, B3 organs and clavs, with sophisticated tone-shaping controls.
• Bass Amp Designer allows bass players to play and record using vintage and modern bass amps, with cabinets and microphones that can be configured to build a custom bass rig.
• Logic Pro X also features a new Sound Library with an updated loop collection and over 1,500 instruments. It also includes effect Patches that make creative use of Track Stacks, Smart Controls, the Arpeggiator and other new plug-ins.

Availabilite at:

• Logic Pro X is available today from the Mac App Store for $199.99 (US) https://itunes.apple.com/app/logic-remote/id638394624?mt=8
• MainStage 3 is available from the Mac App Store for $29.99 - https://itunes.apple.com/us/app/mainstage-3/id634159523?mt=12
• Logic Remote - free download from the App Store.

Selling a monitor in great condition. Used it exclusively with my Blackmagic Pocket. Works fine. Reason for selling is I'm not shooting enough these days and don't see the point of it lying around. Great monitor on a budget. Comes with original box and cables. Accepts LP-e6 battery. Features Histogram, False Color, Focus peaking, Frame Guides and audio meters. Asking $85 shipped in the US. Paypal preferred to confirmed address.

Here are some pics: Album [url]http://imgur.com/a/J0gWt[/url]

[img]http://i.imgur.com/wlLvLZ0.jpg[/img]

[img]http://i.imgur.com/WczaLml.jpg[/img]

[img]http://i.imgur.com/vyLYoKQ.jpg[/img]

• Panasonic GH2 Body only: $350.00 + 3 batteries, two chargers. Two battery are genuine Panasonic. Other is off brand. $70 for 2nd Panasonic and $40 for off brand. (Original Box is available if you'd like
• Nikon Nikkor 50mm F1.8 AIS: $70.00
• Nikon Nikkor 24mm F2.8 AIS: $150.00 - protrusion filed down to fit RJ Lens Turbo. Operates perfect! Original buying price. $250
• RJ Lens Turbo - Nikon F/G reducer speed booster turbo adapter to m4/3 mft GF5 GF6 GX1 EM5 EM1 BM - $100 (Comes in original box)
• Lowell Pro SlingShot 102 : $60.00 TOTAL: $860

Original price for all totals over $1000.

You can opt to BUY ALL for $700. I'll put it all in the Lowell Pro Sling Shot 102.

PM me if interested. US only. Paypal only. Buyer pays shipping. All equipment is well taken care of and maintained. Here are some videos I've made with this little powerhouse!

http://www.3dmark.com/3dm11/10338823[1]

Here is my results with fire strike, sky diver, cloud gate, and Ice storm. http://imgur.com/SugphjG

After receiving over a thousand replies in the last 8 weeks in the previous thread we continue the series here from the following link:-

http://www.personal-view.com/talks/discussion/5806/cluster-x-series-1

Whats it all about? Achieving the best looking overall pictures around - throughtout the popular GOPs. The great thing about Cluster X developments is you can mix and match some of the settings to combine into your favourite setting (e.g. GOP1 for 24p and 25p/FSH, GOP 6 For 1080i60/30p and 12/15 for 720p etc...). Slipstream settings do this for you (mixed and matched and with spanning capabilities where we can plus 80% modes on H & iA mode support).

This has been a tough (and still ongoing) challenge, each setting (and ptools patch change) takes an age to check & measure. Its exhausting work - even with 4 cameras on the go. The measuring to check Quantisation, frame sizes and stability adapting one change at a time is pretty debilitating on mental energy. I hope people appreciate waiting for each setting to appear.

All the new Cluster X series settings for each GOP attached below have been tested on the notorious 14-140 Pany sharp lens. Give me feedback.

Its as simple as A, B, C, D, E, F ! Each .ini setting in ptools for Cluster X Series will equate to setA ('DREWnet' 12/15 GOP), setB ('Nebula' 6 GOP), setC ('Spizz' 3 GOP), setD ('Moon' 1 GOP/3 GOP), setE (Slipstream 1) & setF (Slipstream 2) setG (Slipstream 3) and finally setH (Redshift). Any updates will stay on these sets.

"Bitrate is King. Who needs hi powered scaling matrices when enough Bitrate (if you have it) can drive the quantisation..." Quote from my conversation with Dark Shikari - X264 dev 2012

If you enjoy these settings please don't forget to donate to personal-view by clicking on the link above. Gratitude and thanks to Vitaliy Kiselev.

.

I can't seem to use it on the newer MBPr.

Best regards,

D

Up for sale this VERY RARE Iscomorphot 8/1,5X - Isco-Göttingen Anamorphic lens!

The lens is quite old, regarding this, it is in very good condition. It doesn't have scratches, haze or fungus, it only has coating marks on the front and rear elements. It looks scrary on the photos, but it is only coating and not a deep scratch, sometimes this happens with coatings on 40-50 years old german lenses. I never ever noticed any quality loss.

Since this is a very rare lens, the asking price is 1500 USD (I can accept EURO also). I am opened for offers too, so please PM me!

I am in the European Union, between EU member countries there is not costum duty tax! I ship worldwide!

I hope to be able to afford a GH4 after I sold this. :)

All the best to you guys!

i was using the 14-42 lumix x power zoom, and i wanted to change the lens so i turned off the gh2, waited for the lens to shrink, then i take the lens off the camera body, but the thing is that i then realized that i didn´t wait for the camera to completely turn off before removing the lens, the green LED was on when i deattached the lens off the camera

after i did this, the camera just died, it doesnt turn ON by any means, i tried with different batteries, with completely charged batteries, with ac power, nothing

any ideas? :P

About: A workshop for a school acting group to understand the difference between acting for the stage and acting for a camera. Focus on the acting in one afternoon we shot it with natural light and kept the fancy equipment to a minimum: a reflector and a home built slider.

Shot in three hours with a hacked GH2 (Flow Motion) and vintage Nikon lenses. Edited in Final Cut Pro X. Graded in Davinci Resolve 10. Sound mix in Pro Tools 11.

Winner of the audience award at the TellUs Short Film Festival.

http://www.apple.com/final-cut-pro/whats-new/

Any ideas of how to get my file off of the sd card? I'm scared to remove the sd card from the reader attached to my computer. (WRITTEN ON TUES. JULY 9, 2013 at 4:37pm Eastern Standard Time, U.S.)

Frankly in FCPX I now find that you have to switch off the scrubber almost all the time, as it will scrub everything you touch. Before in my old system it would kind of play stuff back if it could- but now- ehh! Talk about annoying. Move mouse to change some value- ZzzzzzzZzzzip.

Oh well.

Maybe this is what After Effects was talking about? I don't know. But I do know I just watched my timeline background render itself while I made myself a coffee. (The project is 1 Hour long with 1000's of transitions - effects - animations - ken burns etc.

I think that I may get 2.

A bit like what that Edius guy said the other day on the forum: 'render? what is that?'

Whats it all about? Achieving the best looking overall pictures around - throughtout the popular GOPs. The great thing about Cluster X developments is you can mix and match some of the settings to combine into your favourite setting (e.g. GOP1 for 24p and 25p/FSH, GOP 6 For 1080i60/30p and 12/15 for 720p etc...). Slipstream settings do this for you (mixed and matched and with spanning capabilities where we can plus 80% modes on H & iA mode support).

This has been a tough (and still ongoing) challenge, each setting (and ptools patch change) takes an age to check & measure. Its exhausting work - even with 4 cameras on the go. The measuring to check Quantisation, frame sizes and stability adapting one change at a time is pretty debilitating on mental energy. I hope people appreciate waiting for each setting to appear.

All the new Cluster X series settings for each GOP attached below have been tested on the notorious 14-140 Pany sharp lens. Give me feedback.

Its as simple as A, B, C, D, E, F ! Each .ini setting in ptools for Cluster X Series will equate to setA ('DREWnet' 12/15 GOP), setB ('Nebula' 6 GOP), setC ('Spizz' 3 GOP), setD ('Moon' 1 GOP/3 GOP), setE (Slipstream 1) & setF (Slipstream 2). Any updates will stay on these sets.

"Bitrate is King. Who needs hi powered scaling matrices when enough Bitrate (if you have it) can drive the quantisation..." Quote from my conversation with Dark Shikari - X264 dev 2012

If you enjoy these settings please don't forget to donate to personal-view by clicking on the link above. Gratitude and thanks to Vitaliy Kiselev.

.

Cluster X 'Slipstream'

A series of GOP combination settings drawn from the Cluster X series but set at nominal bitrate settings (40 to 72Mbps) to achieve a better spanning percentage for longer recordings plus the ability to be used on slower sd cards. Slipstream attempts to correlate the actual clip duration to the TS (transport stream) duration whilst providing error free population of the cpb buffers. And it seems to work very well at these settings. :-)

Slipstream #1 (Rev B): Release Date: 10/03/2013

A mix of Nebula and DREWnet settings all tightly packed into 72Mbps max 24p and around 40-52Mbps for everything else which in my PAL tests SPAN! You also get 80% mode at 24H and iA modes working. NTSC 720p60 and FSH/HBR30p should now span.

1080p24/1080i50/HBR25p/720p50 at GOP 6 1080i60/HBR30p & 720p60 at 12 GOP

Slipstream #2: Release Date: 10/03/2013

Including;-

1080p24H 88Mbps GOP3

FSH1080i50/HBR25p 60Mbps GOP3

720p50 62Mbps GOP6

FSH1080i60/HBR30p 44Mbps GOP12

720p60 52Mbps GOP12

Slipstream #3: Release Date: 15/03/2013

Including THE GH3 MATRIX ON ALL REC MODES;-

1080p24H 150Mbps GOP1 (moon style)

FSH1080i50/HBR25p 70Mbps GOP1

720p50 62Mbps GOP6

FSH1080i60/HBR30p 64Mbps GOP3

720p60 52Mbps GOP12

NB: Ive had one occasion where the camera just freezes with no apparent error. If this happens simply leave the camera alone for a minute or two until it fully writes out to sdcard (emptying all buffers) THEN turn off/battery pull. Hopefully you will notice that all your spanned files are there on next powerup.

You then have to Right-Click 'Show Package Contents' to Get inside each subfolder, down to the Stream folder before you can open your .mts files for playback. This also happens whether registered mts files are with movist or not.

Let's hope they sort out native support of the AVC/mts/mpeg-4/h264 standard before the release version!

Update: With 10.8.3 The same problem persists with opening SD cards' MTS files. You'll have to go through the usual Open Package Contents or rename the Private Folder to get inside the folder tree.

http://www.amazon.com/Dr-Bott-Final-Keyboard-FCP-AW-CC/dp/B005MEZJNC/ref=sr_1_2?s=electronics&ie=UTF8&qid=1360790735&sr=1-2&keywords=final+cut+pro+x+keyboard

I've got some computer generated video at 60 fps (and higher framerates up to 120 fps) which I would like to convert to standard 30 fps, with motion blur derived from blending the intermediate frames.

Specifically, my question is, is there an After Effects or (preferably) Apple Motion plugin that does this correctly? Or some utility software like MPEG StreamClip?

To be clear, I don't want to change the playback speed of the video, just blend intermediate frames to simulate footage shot at a lower frame rate and corresponding shutter speed.

thanks in advance

bruno

[edit] - on a hunch, I just checked the export options in StreamClip. There are "frame blending" and "better downscaling" options in the "Frame Rate" section. Does anyone have experience with using these for the purpose I described? Specifically wha's on my mind is, if downscaling a high frame rate video (e.g. 120 fps) to 30 fps, are ALL intermediate frames used in the blending? And in what proportion?

ALL PRESENT DRIFTWOOD SETTINGS LINKS ARE NOW INCLUDED BELOW ALONGSIDE THE SETTINGS - SEE LINKS. THANK YOU. ***

Driftwood Sedna 'Settings' for ptools 3.64d- Release 15th March 2012 ETA 01:00am

(Panasonic firmware v1.11 & ptools 3.64d '200212' required). Settings for GH2 & GF2 Lumix cameras. Stats: 24p Intra, 1080i/HBR Intra, 720 GOP3/GOP6 all settings as Orion with Sedna Matrices:-

A = High Detail matrix Good for Wide full detail shots.

B = Good allround detail matrix Great all round wide / mid shots.

C = Softer detail matrix Softer skin tonal detail.

*You can rename the set.ini files to suit your A to J button placements - just change the letter using right-click rename in Windows/Mac PC)

There's not too massive a difference between them - just fine adjustments. Look great on STD Picture Profile.

Two packs;- one pack set on AQ1, the other Q20.

NOTE: These are balanced high Quantised matrix settings disabling the need for pushing AQ to 2, 3 or 4 or lower manual Q

TECH INFO: Who needs 150M to pull off good looking pictures? You don't. Good to Hi quality Type 10 sdcards only.

NOTES: It seems a lifetime in a week trying to achieve the best possible bitrate, Q, matrix etc... settings to date. Sedna is the work of around 50+ odd hours of continuous testing with 4 GH2s working around the clock with different lenses, ISO's, shutter speeds and stopping up and down... but even that's not enough testing.

Some of these settings have also been put through their paces by @onionbrain (incredible and extensive chart work, thank you Andrew) and @thepalalias and I am deeply grateful for their reports. Per @thepalalias has also been of great help in assisting in visual testing and also for his tireless work testing audio. Therefore, I have included his latest 'Pasadena Pulse Audio V2 Beta 2' audio settings within Sedna - which I know he (and his team) have spent an age developing and getting right. I can vouch that they sound superb - bringing the best audio and recording mic setups available to date to the GH2. Well done fellas. They are to be applauded.

But a week's testing by so few of us is never enough to cover every single conceivable problem. And for that we rely on you filmmakers, documentary makers, videographers, and all to report back your findings.

Personally, I have been rather selfish - trying to achieve the best settings for my up-and-coming film project with the gh2 - fundraiser will be up soon ;-) Predominant testing has therefore taken place at 24p level. Although extensive work has also gone to achieving closeish HBR & 720p settings for users of those settings. I believe more time on these will be spent in the future.

The main objective of Sedna has been to look at ways of calming down the noise, knock down the overblown Reds whilst wrestling with the blues and without the colour space values of 4:2:2, 10bit et al, its near on impossible - we can only mess with the luminance and chrominance. Most of the testing has taken place in real world conditions - the others from my chart basics and the chart profile tests by Andrew @onionbrain. I think all of us testing so far have seen better performance than the stock matrix by Panasonic. Whether you prefer them to Orion or Dark Matter settings is up to you. After all, the human visual system means what's good for one is not the best for another. But now there's more choice.

But enough banter, soon it will be your chance to try out the new settings.

Nick

Driftwood 'Cluster' v1 With Orion (AVC Intra adapted) Matrix VBR 'Settings' for ptools 3.64d- Released 9th March 2012 1am

(Panasonic firmware v1.11 & ptools 3.64d '200212' required). Settings for GH2 & GF2 Lumix cameras. Stats: Upto 72M 24p, Upto 36M HBR, Upto 36M 720p modes. (*All REC MODES include B frames)

INFO: Very simple Long GOP cluster of i/p/b frames principle, Low Bitrate, conservative settings for all round use with a nice matrix for Type 6 card users. After so many requests from non GOP1'ers to provide the Orion Matrix in a Long GOP configuration I settled on this one to hopefully satisfy the need. I like 12 GOP / 15 GOP for Long GOP - as far as editing goes and converters out there, the Ibbpbbpbbpbb (12 GOP PAL) and ibbpbbpbbpbbpbb (15 GOP NTSC) is the most universally supported GOP structure outside of Intra. A nice cluster of i/p and b frames and appropriately titled methinks. Hopefully, this will keep long duration seekers, type 6 card users, and HBR peeps happy (though I doubt I can please all of 'em).

Driftwood Quantum X (v4d Orion) 'Dark Matter' Matrix Pack + HBR FIX - CBR 'Settings' for ptools 3.64d- Released 18:30pm 06/03/2012

(Panasonic firmware v1.11 & ptools 3.64d '200212' required). Settings for GH2 & GF2 Lumix cameras.

INFO: This is the same as 4c below with HBR/1080i modes GOP Related attempted Fix for clipwrap etc.... HBR mode looks better when GOP Related is 1,0,0,0,1,0 That's the only change from 4c. I can't confirm thiss is a defo fix as of yet.

Driftwood Quantum X (v4c Orion) CBR 'Settings' for ptools 3.64d- Released 23:30pm 05/03/2012

(Panasonic firmware v1.11 & ptools 3.64d '200212' required). Settings for GH2 & GF2 Lumix cameras.

Featuring the new 'Dark Matter' matrix set (three version variations) based on current Orion Matrix with hi/lo freq adjustments. Plus 720p on 9/6 GOP. AQ is NOT required. This is a constant Q (Q8) CBR setting which performs measurably better than with AQ4 on. All other settings as before.

INFO: Orion 4c with Dark Matter matrix pack. Three adjusted matrices to try out, all scaled from perceived HVS Great Quality (v1) to middle of these (v2) and perceived HVS Highest quality (v3). HVS = Human Visual System. This is sharper than the Orion matrix of yore which is still great but many of you wanted to pull out a few extra stops. Let's see if this helps YOU. Only other changes from Orion 4b are GOP Releated, 720p is 9/6 for NTSC/PAL.

Please let me know which matrix you like.

Driftwood Quantum X v5b and v5c 'β Pictoris' (baby Quantum X) VBR & CBR versions 'Settings' for ptools 3.64d - Released 10:30am, 01/03/2012

(Panasonic firmware v1.11 & ptools 3.64d '200212' required). Settings for GH2 & GF2 Lumix cameras.

INFO: Two versions - 1) CBR constant Bitrate at 75M, 2) VBR Adaptive Bitrate 35-75M

There are actually four versions (two in each pack CBR/VBR versions) for you to try out of Pictoris, two different matrices - v5b is the new hybrid matrix, v5c is the Orion included matrix. with NEW Driftwood scaled Panasonic GH2 Matrix meets AVC-INTRA Matrix hybrid (somewhere in the middle of Orion matrix meets GH2 Stock matrix) inc;- Settings primed for 50/75M Standard Rec Modes plus additional 25M for Etc Mode 1080p24 on INTRA 50/75M Standard/75M Etc Mode 1080i50/60 INTRA 50M /75M Etc Mode 720p50/60 GOP6/9 40/75M Standard/75M Etc MJPEG Highest Quality 1920&720 Mjpeg modes. Good standard SD card recommended

Two Zip files below contain the settings: Download all packs and try them out:

1. v5b Hybrid Matrix - http://personal-view.com/talks/uploads/FileUpload/ad/36129bda8ba3f8227e80d333835343.zip
2. v5c Orion Matrix - http://personal-view.com/talks/uploads/FileUpload/fd/b85bb0076df6f8ac9631e14cbab6dd.zip

Driftwood Quantum X (v4b Orion) CBR 'Settings' for ptools 3.64d- Released 00:15am 28/02/2012

(Panasonic firmware v1.11 & ptools 3.64d '200212' required). Settings for GH2 & GF2 Lumix cameras.

Link: http://personal-view.com/talks/uploads/FileUpload/7e/c5a359e975b25b4a1af455dea3fce5.zip

INFO: Settings include;- Quantum v9b style constant bitrate patch with full AVC-INTRA Matrix ; Requires firmware v1.1 and ptools 3.64d '200212 dated' (*Not compatible with 180212 dated ptools); CBR style 154M INTRA 108024p; CBR style HBR & 1080i INTRA 100M+ Max; CBR Style GOP12(PAL)/GOP15(NTSC) 720p 50/60 - 80+ Max; AVC Intra Matrix all round; GOP related Adjustments for B frames; EX Tele and 80% mode support. SD_Card=V good Class 10; SanDisk Extreme HD Video recommended

Driftwood Quantum X (v3b Rocket) RC VBR 'Settings' for ptools 3.64d - RC Released 00:15am 28/02/2012

(Panasonic firmware v1.11 & ptools 3.64d '200212' required). Settings for GH2 & GF2 Lumix cameras.

Link: http://personal-view.com/talks/uploads/FileUpload/7e/c5a359e975b25b4a1af455dea3fce5.zip

Changes from v2 include;- Adjusted matrix. AVC-INTRA Matrix on I Frame coding with AVC Intra Scaled Matrix on lower field HBR/1080i P frames and 720 P/B frames. 24p Slightly improved quality to match highest i frames 6080808 limit. 1080i/HBR vastly improved. 720 modes now on GOP12/15 to match frame limit usage of 1080i/HBR (ie percentage increase to match higher frame limit for HBR mode which were capped in v2)

INFO: Settings include;- Adaptive Hi Bitrate INTRA on 1080p24 upto 154M; Adaptive Hi Bitrate 25p(50i PsF) upto 100M; Adaptive Hi Bitrate 30p (60i PsF) upto 100M+; Adaptive Hi Bitrate INTRA 1080i modes upto 100M+; Hi bitrate 720p modes on GOP 12/15 with B frames upto 50M safest; Highest Quality tested MJPEG on 1920x1080 (720 compression mode); Highest Quality tested MJPEG on 1280x720 (480 compression mode); EX Tele Mode support (will increase bitrate usage by around 20M); 80% on 1080p modes (will increase bitrate usage by around 25M)

Driftwood Quantum X AVCHD-I 100/50 (AVC Intra Matrix) Total Intra setting! More news soon...

Driftwood Quantum X 'SpanMyBitchUp' v2b - Released 10:15am 25/02/2012

(Panasonic firmware v1.11 required). For GH2 & GF2 Lumix cameras.

Link: http://personal-view.com/talks/uploads/FileUpload/67/8f1ad7ca0ce0baa06e363e950e9b11.zip

INFO: Updated version of SpanMyBitchUp.

Settings include;- Adaptive Hi Bitrate INTRA on 1080p24 - upto 100M. (* Only for GH2); Adaptive Hi Bitrate 25p(50i PsF) INTRA - upto 100M; Adaptive Hi Bitrate 30p (60i PsF) INTRA - upto 100M; Adaptive Hi Bitrate INTRA 1080i modes - upto 100M; 720p modes on GOP 6 with B frames - upto 98M; Highest Quality tested MJPEG on 1920x1080 (720 compression mode); Highest Quality tested MJPEG on 1280x720 (480 compression mode); EX Tele Mode support; 80% on 1080p modes; 24L, 720/1080i FH/H settings on Trick mode (encoder calcs bitrate)

Driftwood Quantum X (v2 Rocket) 'Settings' for ptools 3.64d - Released 22/02/2012

(Panasonic firmware v1.11 required). For GH2 & GF2 Lumix cameras.

Link: http://personal-view.com/talks/uploads/FileUpload/f3/eaad614692159722f20918184ddd0c.zip

INFO: Adaptive bitrate settings. (See attached settings zip file below). Settings include;- Adaptive Hi Bitrate INTRA on 1080p24 - upto 154M. (* Only for GH2); Adaptive Hi Bitrate 25p(50i PsF) INTRA - upto 100M+; Adaptive Hi Bitrate 30p (60i PsF) INTRA - upto 120+; Adaptive Hi Bitrate INTRA 1080i modes - upto 120+; 720p modes on GOP 6 with B frames - upto 98M; Highest Quality tested MJPEG on 1920x1080 (720 compression mode); Highest Quality tested MJPEG on 1280x720 (480 compression mode); EX Tele Mode support; 80% on 1080p modes; AVC INTRA Matrix on I Frame coding with Flat 16 Matrix on P/B frames

These settings are dedicated to VK @Vitaliy_Kiselev (master in control) and Chris Brandin @cbrandin (thee font of information).

IF YOU LIKE THESE SETTINGS PLEASE PAYPAL DONATE (ABOVE) TO VITALIY FOR HIS TIRELESS WORK ON GIVING US THE HACK.

Q. Where do I get firmware v1.11 and ptools 3.64d?

A. All the neccessary links are available here at top of page 1: http://www.personal-view.com/talks/discussion/2317/ptool-v3.64d-topic/p1

Q. How do I load Quantum settings & firmware v1.11 into ptools 3.64d?

A. See below - its simple.

1. simply make a new folder on a pc call it 'Quantum'.

2. Depending on which camera you own do the following;-

GH2 Users: Copy Panasonics official GH2 firmware v1.11 (GH2__V11.bin) into that folder. (You can download this firmware from Panasonics offical site at http://panasonic.jp/support/global/cs/dsc/download/fts/dl/gh2.html)

GF2 Users: Copy Panasonics official GF2 firmware v1.11 (GF2__V11.bin) into that folder. (You can download this firmware from Panasonics offical site at http://panasonic.jp/support/global/cs/dsc/download/fts/dl/gf2.html)

3. Download latest ptools v3.64d 200212 from the 'ptools 3.64d' thread link (https://www.personal-view.com/faqs/gh2-hack/ptool-software) and copy that into the folder too.

4. Download the Quantum patches (white looking documents found at the bottom of this section) and unzip them to the Quantum folder.

5. NOW run ptools, then load the firmware v1.11 (GH2__V11.bin for GH2 users or GF2__V11.bin for GF2 users) when it asks, now you'll see Rocket and Orion settings highlighted in Green (hover mouse over B and G buttons) click on either, whichever you wanna try.

6. One youve selected your fav' Quantum patch then click on SAVE FIRMWARE button and save the patched firmware to your sdcard naming it higher than the original GH2__V11.bin (GF2__V11.bin for GF2) firmware (makes sense yeah!) for example 'GH2__V12.bin' (GF2__V12.bin for GF2) when asked.

7. Load the new firmware from the sdcard to your camera by inserting sdcard, switch on camera, press the green-marked triangular ► 'Play' button once, Answer yes, to update your firmware. Note: Make sure youve got a fully charged battery before doing this update.

8. Done! Film away! *Please note you WILL NOT see any cosmetic changes in the menu system of the camera - but rest assured, the Quantum settings are all loaded & working hidden, under the bonnet of the camera ;-)

HOW TO PUT IT BACK TO STOCK SETTINGS AGAIN? You can always go back to stock settings by simply UNCHECKING all the boxes in ptools (or by clicking any unused red button, A to J)and saving the edited firmware back to your sdcard and reupdating. Easy.

All basic and beginners questions about the hack can be found here http://www.personal-view.com/faqs/

(Panasonic firmware v1.11 & ptools 3.64d '200212' required). Settings for GH2 & GF2 Lumix cameras.

INFO: Two versions - 1) CBR constant Bitrate at 75M, 2) VBR Adaptive Bitrate 35-75M

UPDATE: Updated the Orion pack as I'd left Q off. All good now (thanks to @oleg2k). Earlier msg: Ignore plain titled v5 versions (they were accidently left with deblocking on from a prior test). For the correct versions read below.

There are actually four versions for you to try out of Pictoris, two different matrices - v5b is the new hybrid matrix, v5c is the Orion included matrix. with NEW Driftwood scaled Panasonic GH2 Matrix meets AVC-INTRA Matrix hybrid (somewhere in the middle of Orion matrix meets GH2 Stock matrix) inc;- Settings primed for 50/75M Standard Rec Modes plus additional 25M for Etc Mode 1080p24 on INTRA 50/75M Standard/75M Etc Mode 1080i50/60 INTRA 50M /75M Etc Mode 720p50/60 GOP6/9 40/75M Standard/75M Etc MJPEG Highest Quality 1920&720 Mjpeg modes. Good standard SD card recommended

2 Zip files below: Download the CBR version for constant bitrate, choose VBR for variable bitrate for even more space saving on sdcard.

*** MINOR UPDATE ***Released 00:15am 28/02/2012

ROCKET and ORION users please update to 3b and 4b respectively. A slight change in the weighting of the 720p GOP structure - this time it looks correct for the proper weight on B frames under GOP Related 720p50/60 opt1/2 settings.

Download the zip file "MINOR UPDATE - Driftwood Quantum X (v3B Rocket RC) (V4B Orion) Updated - 0016am 28022012 - setb setg.zip" below and extract and overwrite the old versions of Rocket & Orion. Thanks.

Driftwood Quantum X (v4 Orion) CBR 'Settings' for ptools 3.64d- Released 16:30pm 25/02/2012

(Panasonic firmware v1.11 & ptools 3.64d '200212' required). Settings for GH2 & GF2 Lumix cameras.

INFO: Settings include;- Quantum v9b style constant bitrate patch with full AVC-INTRA Matrix ; Requires firmware v1.1 and ptools 3.64d '200212 dated' (*Not compatible with 180212 dated ptools); CBR style 154M INTRA 108024p; CBR style HBR & 1080i INTRA 100M+ Max; CBR Style GOP12(PAL)/GOP15(NTSC) 720p 50/60 - 80+ Max; AVC Intra Matrix all round; GOP related Adjustments for B frames; EX Tele and 80% mode support. SD_Card=V good Class 10; SanDisk Extreme HD Video recommended

Driftwood Quantum X (v3 Rocket) RC VBR 'Settings' for ptools 3.64d - RC Released 16:30pm 25/02/2012

(Panasonic firmware v1.11 & ptools 3.64d '200212' required). Settings for GH2 & GF2 Lumix cameras.

(Note: Please ignore the earlier zip file released v3 version, download ONLY the RC version)

Changes from v2 include;- Adjusted matrix. AVC-INTRA Matrix on I Frame coding with AVC Intra Scaled Matrix on lower field HBR/1080i P frames and 720 P/B frames. 24p Slightly improved quality to match highest i frames 6080808 limit. 1080i/HBR vastly improved. 720 modes now on GOP12/15 to match frame limit usage of 1080i/HBR (ie percentage increase to match higher frame limit for HBR mode which were capped in v2)

INFO: Settings include;- Adaptive Hi Bitrate INTRA on 1080p24 upto 154M; Adaptive Hi Bitrate 25p(50i PsF) upto 100M; Adaptive Hi Bitrate 30p (60i PsF) upto 100M+; Adaptive Hi Bitrate INTRA 1080i modes upto 100M+; Hi bitrate 720p modes on GOP 12/15 with B frames upto 50M safest; Highest Quality tested MJPEG on 1920x1080 (720 compression mode); Highest Quality tested MJPEG on 1280x720 (480 compression mode); EX Tele Mode support (will increase bitrate usage by around 20M); 80% on 1080p modes (will increase bitrate usage by around 25M)

Driftwood Quantum X AVCHD-I 100/50 (AVC Intra Matrix) Total Intra setting! More news soon...

Driftwood Quantum X 'SpanMyBitchUp' v2b - Released 10:15am 25/02/2012

(Panasonic firmware v1.11 required). For GH2 & GF2 Lumix cameras.

INFO: Updated version of SpanMyBitchUp. (See attached settings zip file below). Settings include;- Adaptive Hi Bitrate INTRA on 1080p24 - upto 100M. (* Only for GH2); Adaptive Hi Bitrate 25p(50i PsF) INTRA - upto 100M; Adaptive Hi Bitrate 30p (60i PsF) INTRA - upto 100M; Adaptive Hi Bitrate INTRA 1080i modes - upto 100M; 720p modes on GOP 6 with B frames - upto 98M; Highest Quality tested MJPEG on 1920x1080 (720 compression mode); Highest Quality tested MJPEG on 1280x720 (480 compression mode); EX Tele Mode support; 80% on 1080p modes; 24L, 720/1080i FH/H settings on Trick mode (encoder calcs bitrate)

Driftwood Quantum X (v2 Rocket) 'Settings' for ptools 3.64d - Released 22/02/2012

(Panasonic firmware v1.11 required). For GH2 & GF2 Lumix cameras.

INFO: Adaptive bitrate settings. (See attached settings zip file below). Settings include;- Adaptive Hi Bitrate INTRA on 1080p24 - upto 154M. (* Only for GH2); Adaptive Hi Bitrate 25p(50i PsF) INTRA - upto 100M+; Adaptive Hi Bitrate 30p (60i PsF) INTRA - upto 120+; Adaptive Hi Bitrate INTRA 1080i modes - upto 120+; 720p modes on GOP 6 with B frames - upto 98M; Highest Quality tested MJPEG on 1920x1080 (720 compression mode); Highest Quality tested MJPEG on 1280x720 (480 compression mode); EX Tele Mode support; 80% on 1080p modes; AVC INTRA Matrix on I Frame coding with Flat 16 Matrix on P/B frames

These settings are dedicated to VK @Vitaliy_Kiselev (master in control) and Chris Brandin @cbrandin (thee font of information).

IF YOU LIKE THESE SETTINGS PLEASE PAYPAL DONATE (ABOVE) TO VITALIY FOR HIS TIRELESS WORK ON GIVING US THE HACK.

Q. Where do I get firmware v1.11 and ptools 3.64d?

A. All the neccessary links are available here at top of page 1: http://www.personal-view.com/talks/discussion/2317/ptool-v3.64d-topic/p1

Q. How do I load Quantum settings & firmware v1.11 into ptools 3.64d?

A. See below - its simple.

1. simply make a new folder on a pc call it 'Quantum'.

2. Depending on which camera you own do the following;-

GH2 Users: Copy Panasonics official GH2 firmware v1.11 (GH2__V11.bin) into that folder. (You can download this firmware from Panasonics offical site at http://panasonic.jp/support/global/cs/dsc/download/fts/dl/gh2.html)

GF2 Users: Copy Panasonics official GF2 firmware v1.11 (GF2__V11.bin) into that folder. (You can download this firmware from Panasonics offical site at http://panasonic.jp/support/global/cs/dsc/download/fts/dl/gf2.html)

3. Download latest ptools v3.64d 200212 from the 'ptools 3.64d' thread link (https://www.personal-view.com/faqs/gh2-hack/ptool-software) and copy that into the folder too.

4. Download the Quantum patches (white looking documents found at the bottom of this section) and unzip them to the Quantum folder.

5. NOW run ptools, then load the firmware v1.11 (GH2__V11.bin for GH2 users or GF2__V11.bin for GF2 users) when it asks, now you'll see Rocket and Orion settings highlighted in Green (hover mouse over B and G buttons) click on either, whichever you wanna try.

6. One youve selected your fav' Quantum patch then click on SAVE FIRMWARE button and save the patched firmware to your sdcard naming it higher than the original GH2__V11.bin (GF2__V11.bin for GF2) firmware (makes sense yeah!) for example 'GH2__V12.bin' (GF2__V12.bin for GF2) when asked.

7. Load the new firmware from the sdcard to your camera by inserting sdcard, switch on camera, press the green-marked triangular ► 'Play' button once, Answer yes, to update your firmware. Note: Make sure youve got a fully charged battery before doing this update.

8. Done! Film away! *Please note you WILL NOT see any cosmetic changes in the menu system of the camera - but rest assured, the Quantum settings are all loaded & working hidden, under the bonnet of the camera ;-)

HOW TO PUT IT BACK TO STOCK SETTINGS AGAIN? You can always go back to stock settings by simply UNCHECKING all the boxes in ptools (or by clicking any unused red button, A to J)and saving the edited firmware back to your sdcard and reupdating. Easy.

All basic and beginners questions about the hack can be found here http://www.personal-view.com/faqs/