As luck would have it, I am selling mine:

I've had great results with this set on Full Frame, S35, and Micro Four Thirds cameras.

Package includes:

1 x Cavision 3x3 Matte Box Package - Includes side and top flags, and "nuns knickers".

4 x Cavision 58mm Conical Step-up Ring with 85mm Outside Diameter - Allows lenses with a 58mm filter thread to engage directly with the matte box. The cone design helps to prevent vignetting. If you have lenses with a smaller filter thread, you can use step up rings to attach these.

1 x Cavision 85mm to 72mm Threaded Metal Deep Offset Step-Up Adapter Ring - For wide angle lenses with filter threads of 72mm (can be adapted with step rings). This gets the front element of the lens as close as possible to the filter to prevent vignetting. I've used it successfully with an 18mm lens on my 5D3 without vignetting.

6 x Cavision MBH3X3M 3x3 Metal Filter Tray - Much sturdier then the plastic filter trays that come with the matte box.

1 x Cavision MBH3X4M 3x4 Metal Filter Tray - For using ND grad filters.

1 x LockCircle Slider Base with Support Mount (Y) - This allows the matte box to be mounted to rods, while allowing them to slide back and forth for lenses that extend when zooming or focusing.

1 x Schneider 4 x 4" Five Slot Filter Pouch - Fits four filter trays nicely for fast deployment.

Filters:

1 x Schneider Neutral Density (ND) 0.3 Filter (3 x 3")

1 x Schneider Neutral Density (ND) 0.6 Filter (3 x 3")

1 x Schneider Neutral Density (ND) 0.9 Filter (3 x 3")

1 x Schneider Neutral Density (ND) 1.2 Filter (3 x 3")

1 x Schneider Circular True-Polarizing Filter (3 x 3")

1 x Tiffen Soft Edge Graduated 0.6 ND Filter (3 x 3")

Everything has been lightly used and is in great condition. I'd consider selling the filters separately as a set, but I'm not looking to break up the set any further than that at this point.

Purchased new, this set would be around $1600. I'm offering it up for $1000, with Paypal charges on me and shipped anywhere in the Continental United States.

Let me know if you have any questions.

• 1x Panasonic DMC-GH2 incl. original accessories (1x DMC-BL12 battery, charger, all cables and manuals, in original box)
• 1x Panasonic H-FS014045 14-45 mm f3.5-5.6, incl. lens hood, lens caps and pouch
• 2x Panasonic DMC-BL12 batteries (in addition to the one in the camera, ie. a total of 3 genuine Panasonic batteries)
• 1x Panasonic DMW-AC8 power adapter (to operate camera off wall outlet in studio or for long-time recording), in original box
• 1x Sandisk Extreme HD Video 32 GB SDHC
• 1x Pixel TW-282 RS1 wired/wireless remote control (e.g. for timelapse recording) with all accessoires, in original box

All of the above has had relatively little use and has been cared for very well. It is therefore in excellent condition.
The camera came originally with the 14-42 mm kit lens, but is on offer here with the sharper and optically better 14-45 mm lens.

Price €480 plus shipping (from EU).

Additional photos available on personal request.

Do you guys think this is the best value I can get for around $1000? I really can’t spend any more than that. Should I just get a better recorder and ditch the preamp? Also would be interested to hear opinions on Tiny Box vs MP-1. Your advice is appreciated.

Before anyone suggests it, I know that I could remove the glass from a circular polarizer and use that, but I don't think that it would be smooth enough. I'd like to see if there is anything that is specifically designed for this.

As usual Forga have very good manufacturing quality. Very simple matte box, good if you need just work horse.

Available at - http://www.personal-view.com/deals/matte-boxes/fotga

TrusMT follow focus

NewMap follow focus

Lanparte follow focus

Tilta follow focus with hard stops

Tilta follow focus kit

Cinematics Matte Box

New price for all over 800 euro.

I'm selling for 450 euro or PM your offers. Payments via PayPal. I'm located in Sweden

I can sell as parts also!

• Anodized Cage with handles, rails, allen wrenches, and threaded holes, even has lips to secure camera and allows battery change without removing camera.

• Matte Box (vertically adjustable) with flags and different sized rings,

• Rails (vertically adjustable on tripod mount), both top and bottom rails

• Monitor with three batteries, hood, charger, short HDMI cable, and AC plug. Not a high-end monitor, but works well, reliable, and is great for focusing.

• Follow-focus, including two different mount heights, I can forewarn that this does have some play, but I wouldn't be surprised if it's an easy fix.

• Threaded arms and shoes mounts – work for mounting any items on cage or camera.

All is in good cosmetic and working condition (and in a nice Pelican Case), except the minor play on the follow focus which was mentioned. If possible, I'd like to sell the kit or as much together as I can. Check out pictures and make me reasonable offer if interested please.

*note this does not include the camera bodies themselves.

Cavision 3x3" Matte Box with Top and Side Flags $208

(At a pinch, a single 4.5" x 6" glass ND filter can be cut into two stackable 3" filters !!)

http://www.bhphotovideo.com/c/product/868189-REG/Cavision_mb3485s_3x3_Matte_Box_with.html

http://cavision.biz/3x3matteboxesset.aspx

Prime Circle Matte Box - seen here: http://www.lockcircle.com/matbox/buy/ Selling MB-2 bundle. Includes 77-95 step up ring.
$1000

Olympus 17mm f2.8 pancake lens No dust, scratches, no wear or tear $200

Lanparte DigiFF follow focus Minimal wear and tear, includes whip, no lens gear $375

CarrySpeed VF4 Universal Viewfinder Used once. $125

Schneider ND filter 4x5.65 I have 0.6 or 0.9 no scratches/wear or tear. Comes in padded case $150/each

Novoflex Nikon to MFT lens adapter. Minimal wear and tear. $175

PM me if interested. I take payments through PayPal. I ship (US) through USPS two-day, shipping costs $5-$10

Price: 500 USD or 400 euro payments via PayPal. + $45 or 30 euro postage includes tracking number. I'm located in Sweden

Or PM your offers ...

Optional, can include : Height Extension Bracket for GWMC and GPVCMC for + 50 euro

I'm located in Sweden ,will send worldwide , payments via PayPal

I'm selling this cause I have already one Genus Mate box for my GH3 ...

http://www.amazon.com/Opteka-MB-X-Un.../dp/B008FQOU98

All equipment listed is in good working order and actually surplus or rarely used, actual pics (note some items sold):

1. Canon Vixia HF200 HD camcorder with battery and charger - SOLD

2. Genus Wide Matte Box Deluxe with 15mm rails and 77mm adapter (original box) - $400

3. Sony PCM-M10 Recorder (original box) - SOLD

4. Sekonic L 758 Cine Light Meter L758 - SOLD

5. Panasonic Lumix GH2 Body, battery and charger (original box) - SOLD

6. Fostex FR2-LE with Porta Brace - SOLD

7. Nikon AI-S 24mm f2.0 - SOLD

8. Nikon Ai-S 35mm f1.4 - SOLD

9. Nikon Ai-S 105mm f2.8 Micro / Macro - SOLD

Would prefer to sell locally in NY for cash but willing to ship if buyers pays via Paypal plus shipping. Feel free to send questions or offers to me at ikoniq gmail com. This is all surplus equipment for me so looking for new homes for them.

Thanks, Kevin

As far as I know none of currently sold such MB have filter problems.
Also 4x4 filters are not 100x100 filters, they are slightly larger. Larger trays are not for 4x5 filters also.

This is also a prototype, there are many ways this can be improved, but its fully functional in its present state. Sorry for the lousy photo, but my Canon Powershot is half dead. I still need to do a few adjustments such as replace my plastic and rubber mounts with metal plates, spray the matte box with a flat, non-glare paint, attach a black elastic bag between the matte box and lens so when I use smaller lenses there will be no light seeping through on the sides, etc.

If anyone is interested, I'll give you the full details. The whole thing was built using these two racks and scraps of items I found laying around in my garage/tool room. It holds my GH2, and Juicedlink nicely. I have my NTG-3 on a boom pole ($17), so there is no mic support arm. It would be easy enough to attach one.